West Branch of the Delaware, hand airbrushed

West Branch Brown trout Trucker

Catskills · one at a time

West Branch Brown trout Trucker — a trucker hat by John Derek Leavitt
Shown on the low profile blank, stone front panel.

A trucker cap hand airbrushed with a brown trout and the West Branch of the Delaware, sprayed in five stencil layers and sealed by hand.

  • Hand airbrushed, never printed
  • Five stencil layers plus freehand detail
  • Palette pulled from the West Branch of the Delaware itself
  • One size, adjustable

The cap it is painted on

The same artwork, sprayed on any of these. The front panel colour changes what the paint sits on, so it changes the hat.

  • Classic trucker

    Natural front panel

    $85

    Crown
    6-panel structured cotton twill
    Build
    Structured — buckram behind the front panels
    Back
    Polyester mesh back
    Closure
    Snapback, plastic tab
  • Low profileshown

    Stone front panel

    $85

    Crown
    5-panel unstructured cotton
    Build
    Unstructured — soft front, no buckram
    Back
    Soft poly mesh back
    Closure
    Snapback, plastic tab
  • Waxed canvas

    Field tan front panel

    $110

    Crown
    6-panel waxed canvas front
    Build
    Lightly structured — the waxed canvas holds its own shape
    Back
    Heavy poly mesh back
    Closure
    Brass buckle strap

Fit and measurements

BlankProfileCrown heightVisorAdjusts to
Classic truckerMid profile3¾ in (9.5 cm)Pre-curved, 2¾ in (7 cm)21½–24 in (54.5–61 cm)
Low profileLow profile3¼ in (8.3 cm)Pre-curved, 2½ in (6.4 cm)21½–24 in (54.5–61 cm)
Waxed canvasMid profile3⅝ in (9.2 cm)Pre-curved, 2¾ in (7 cm)21–23½ in (53.5–59.5 cm)

One size. Run a tape around your head just above the ears, keeping it level — anything inside the range above will close on it.

How it is painted

5 passes, in this order. Each mask comes off and the paint has to dry before the next one goes down, which is most of why a cap takes what it takes.

  1. sky

    Soft fade, hardwood green into slate blue

  2. ridgeline

    Frisket-cut skyline, Catskills

  3. water

    Masked river channel, hendrickson tan

  4. subject

    Brown trout, hand-cut stencil, three tones

  5. detail

    Freehand spray for fins, foam and highlights

The artwork

Wild browns in big, cold water — the birthplace of American dry-fly fishing, still refusing to be easy.

Every cap is sprayed by hand on a blank, one at a time. Five layers go on in order — sky, ridgeline, water, fish, then freehand detail — and each one has to dry before the next mask goes down. There is no print run and no transfer.

The palette is taken from the water itself: hardwood green, slate blue, hendrickson tan, evening violet. That is why two hats of the same river still differ, and why a hat of a different river looks nothing like this one.

Water-based paint, heat set, then two light coats of matte sealer. It will take rain and a season on a boat. It will not take a washing machine.

The water it was painted from

West Branch of the DelawareCatskills · NY, PA

River
West Branch of the Delaware, Catskills
States
NY, PA
Fish
Brown trout, Rainbow trout
Water type
Tailwater

Specifications

Airbrush palette

Paint
Createx Wicked, water-based, heat set
Colours
hardwood green, slate blue, hendrickson tan, evening violet
Finish
Matte sealer, two light coats

What arrives

  • The hat
  • A care card
  • A numbered tag naming the water it was painted from

Looking after it

  • Spot clean with cool water and a soft brush. Never a washing machine.
  • Keep it out of a hot car for long stretches — heat-set paint is tough, but a dashboard in July is not a test worth running.
  • Reshape the brim by hand while damp.

Paint your own

West Branch Brown trout Trucker by @jderekleavitt — Dekasso